TMS320F280025: No symbols are Defined.

Shubha Ravi

I have been trying to execute a code that was compiled and executed successfully earlier and all of a sudden i started getting code halt as below image. Could you please let us know what could be the issue and how to resolve the same.

over 3 years ago

0 Santosh Jha over 3 years ago

TI__Guru 50611 points

Hi Shubha,

Are you running from Flash or RAM? Can you try 'WaitBoot' mode?

Regards, Santosh

0 Shubha Ravi over 3 years ago in reply to Santosh Jha

Prodigy 40 points

We are running through flash, and as of now wait boot mode is disabled through OTP in our software.

Can you please suggest how do we test it after enabling the wait boot mode?

Can you also let me know what could be the root cause of this issue?

0 Santosh Jha over 3 years ago in reply to Shubha Ravi

TI__Guru 50611 points

Subha,

It looks like non-maskable watchdog reset. Please take a look at this link on various Flash related issue.

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/951697/faq-flash-frequently-asked-questions

What has changed since it was working? Did you add new code ?

I was thinking if you have a way to set 'Waitboot' mode, then you can go back to the code which was working and then review the changes.

Regards, Santosh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280025: No symbols are Defined.