LAUNCHXL-F28379D: Adding flashapi in driverlib based project

Jungwoo Hur

Prodigy 51 points

Part Number: LAUNCHXL-F28379D
Other Parts Discussed in Thread: C2000WARE

Hello, Ti team

I want to write and read data to the flash memory.

My project is driverlib based project.

How can I include the flashapi to my project?

I would be so happy if there are some references or guides of steps how to include different library and utilize both.

Thank you

Sincerely, Jungwoo

over 2 years ago

+1 Vamsi Gudivada over 2 years ago

TI__Guru* 87155 points

Hi Jungwoo,

I don't think there is a driverlib based flash API usage example in F2837xD. However, including the flash API library should not be different driverlib and bitfield examples.

If needed, please take a look at F28004x driverlib based flash API usage example available at C:\ti\c2000\C2000Ware_x_xx_xx_xx\driverlib\f28004x\examples\flash\flashapi_ex1_program_autoecc.c

You can import this example in to CCS and take a look at the linker command file.

Thanks and regards,

Vamsi

0 Jungwoo Hur over 2 years ago in reply to Vamsi Gudivada

Prodigy 51 points

Hellow Vamsi,

Thanks a lot!!

I will try the example and reference the linker cmd

Sincerely, Jungwoo

0 Vamsi Gudivada over 2 years ago in reply to Jungwoo Hur

TI__Guru* 87155 points

Hi Jungwoo,

Can I close this thread then?

Thanks and regards,

Vamsi

0 Jungwoo Hur over 2 years ago in reply to Vamsi Gudivada

Prodigy 51 points

Sure!! Thanks a lot

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: Adding flashapi in driverlib based project