TMS320F28388D: Internal Flash memory

aruna revanna

Part Number: TMS320F28388D
Other Parts Discussed in Thread: C2000WARE

Hi All,

I am using a TMS320F28388 controller for my project. I can run the application in debug mode. I want to develop a stand-alone application.

What are the project configuration changes that must be made to run the code from flash memory?

Share the link of the document that explains the details about configuration.

Thank in Advance

over 2 years ago

0 Santosh Jha over 2 years ago

TI__Guru 50611 points

Hi Aruna,

Please take a look at this link. This goes through steps needed to switch from RAM mode to Flash configuration.

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/878674/faq-flash---how-to-modify-an-application-from-ram-configuration-to-flash-configuration

If you are using C2000Ware SDK example. You can change the 'Build Configuration' to CPU1_FLASH, and it should automatically use flash based linker command and will add _FLASH in build switch.

Regards, Santosh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28388D: Internal Flash memory