This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-02008: TIDM-2007/8

Part Number: TIDM-02008

HI, we are recreating the pcb design of the TIDM-2007/8 Totem pole. We found several small/minor issues on this pcb layout which are not severe. However the picture below puzzles us since, for instance:

pin12, for AC_CUR_REF, is hard connected to PGND on the PCB layout and thus NOT conform the schematics????

Please advise?

kind regards,

Laurent van Poppelen