TMS320F280039C: Build project using command line for Jenkins

Hi,

Just to make sure your setup is correct, have you tried to run any C2000Ware SDK example and see if the project is imported correctly and then it builds correctly. I just tried on my setup to import and build and it works fine. The commands used are:

Import Project:

/opt/ti/ccs1220/ccs/eclipse/ccstudio -noSplash -data ./test -application com.ti.ccstudio.apps.projectImport -ccs.location /home/sjha/ti/c2000/C2000Ware_4_03_00_00/driverlib/f28003x/examples/led/CCS/led_ex1_blinky.projectspec

Build Project:
/opt/ti/ccs1220/ccs/eclipse/ccstudio -noSplash -data ./test -application com.ti.ccstudio.apps.projectBuild -ccs.projects led_ex1_blinky -ccs.configuration 'CPU1_RAM'

Once you have working setup, you can debug the parameters for your application.

Regards, Santosh

Hello Santosh,

Thank you for the answer !!!

You try this test using linux distrubition not windows ?

When I try to import example project using the command line I have the same issue... maybe it's restriction right access ( I'm not super user admin but only admin in my computer)

Fakir,

We tested on Windows as well as Linux. When you import the project using the command mentioned earlier, what is the error you are getting?

Regards, Santosh

Hi Santosh,

Not exactly the same command line you used "ccstudio" instead of "eclipsec" why ?

I also try to used ccstudio and I have the issue I attach the screenshot.

Test with eclipsec

Test with ccstudio

Thanks

Fakir,

Let me try on Windows system and get back to you. I am out of office tomorrow, I will get back to you on Monday.

Regards, Santosh

Hello Santosh,

I used the command line with cmd prompt instead of windows PowerShell and it's work fine with cmd prompt.

Do you know why it's not working with PowerShell ?

Fakir,

I am not sure why it does not work with PowerShell. I will forward the thread to CCS team to comment on this.

Regards, Santosh