TMS320F28386D: runESCRAMParityTest

W Z

When use the example from IT sdl_ex_ram_ecc_parity_test, after executed failCount += runESCRAMParityTest(); It return the failCount

Could you please help check why this happen?

over 2 years ago

0 Whitney Dewey over 2 years ago

TI__Guru 54305 points

This is a test of the EtherCAT RAM. Are you running on an F28386D device? I don't think that particular device variant supports EtherCAT--it looks like it is only on the F28388 device variants.

Whitney

0 W Z over 2 years ago in reply to Whitney Dewey

Expert 2390 points

Yes, I am running on F28386D

From C2000 Software Diagnostic Library for TMS320F2838x API USER’S GUIDE, it only mentioned F2838X.

Could you please confirm that F28386D does not EtherCAT?

+1 Whitney Dewey over 2 years ago in reply to W Z

TI__Guru 54305 points

Here's the table I was referring to in the device family's datasheet:

If you don't have EtherCAT, you shouldn't need to worry about testing the dedicated EtherCat RAM in your application.

Whitney

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28386D: runESCRAMParityTest