• State
  • Locked Locked
  • Replies 5 replies
  • Subscribers 82 subscribers
  • Views 337 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D: eSMO/HFI/IPD Scripts

Ray Vincent Aranzaso
Genius 17200 points
Part Number: TMS320F28379D
Other Parts Discussed in Thread: TMS320F28069M, TMS320F280049C, CONTROLSUITE, C2000WARE-MOTORCONTROL-SDK

Hi,

Good Day.

The customer needs eSMO/HFI/IPD scripts for their motor control based on C2000.
We use a couple of C2000s mainly.
TMS320F28379D
TMS320F28069M
TMS320F280049C

Thank you very much.

Best Regards,

Ray Vincent

  • 0
    TI__Expert 4720 points

    Hi Ray,

    The customer could refer to the eSMO&IPD example available in the ControlSUITE, under "development_kits\HVMotorCtrl+PfcKit_v2.1\HVPM_Enhanced_Sensorless_2803x".

    Thanks,

    Jiaxin 

  • 0 in reply to Jiaxin Teng
    TI__Genius 17200 points

    Hi Jiaxin,

    Good Day.

    In the description of the project you mentioned, it writes:
    “For access to eSMO executable code, the user is advised to contact the nearest TI sales office or distributor”
    “Contact TI sales for access to HFI”
    “The executable for initial position detection (IPD) and high-frequency injection (HFI) is in hfi.lib file which is not part of the downloadable version of the control suite. For access contact TI or distributor FAE”
    As it's advised in the project we need the files from you.
    Please advise. Thank you very much.

    Best Regards,

    Ray Vincent

  • 0 in reply to Ray Vincent Aranzaso
    TI__Expert 4720 points

    Hi Ray,

    I got the confirmation that we no longer support the software in the ControlSUITE. For eSMO implementation, the customer can refer to the universal motor control lab in the C2000Ware-MotorControl-SDK. For the HFI/IPD, currently there is no available examples in the MotorControl SDK yet.

    Thanks,

    Jiaxin

  • 0 in reply to Jiaxin Teng
    TI__Genius 17200 points

    Hi Jiaxin,

    Good Day. The customer needs at least lib files for IPD and HFI because they are used in the example you mentioned.

    Thank you very much.

    Best Regards,

    Ray Vincent

  • 0 in reply to Ray Vincent Aranzaso
    TI__Expert 4720 points

    Hi Ray,

    Sorry but the libs for IPD and HFI in the ControlSUITE are no longer available for downloading. 

    Sincerely,

    Jiaxin