• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 315 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

which Security ic can be used for hardware authentication

vikas rastogi
Intellectual 295 points

Other Parts Discussed in Thread: BQ26100, TMS320F28379D

Hi ,

     We are working on the power converter, we want to use the security ic for our power converter , Can you suggest which ti IC we can use .

i was looking to bq26100 ic but it looks like used for only battery pack. Can it be used for hardware authentication?

Kindly suggest.

  • 0
    Intellectual 295 points

    Can it be used with tms320f28379d mcu but this mcu does not has any SDQ peripheral or communication protocol mentioned in the data sheet.

    Can you confirm or explain how to use this ic with tms320f28379d.

  • 0 in reply to vikas rastogi
    TI__Guru* 95315 points

    Vikas,

                    It is not clear exactly what you are trying to do. If you are concerned about protecting your code in the Flash memory of 28379D, you have the on-chip DCSM module for that. If you are looking to authenticate the battery pack connected to your converter, BQ26100 may be the way to go. However, 28379D does not support SDQ interface. I checked our website and all products appear to only feature 1-wire interface.