TMS320F28379D:TMS320F28379D LaunchPadxl

Semanur Akyüz

Part Number: TMS320F28379D
Other Parts Discussed in Thread: TMS320F28335, BOOSTXL-DRV8323RS, C2000WARE-MOTORCONTROL-SDK

Merhaba, öncelikle iyi günler dilerim. TMS320F28379D LaunchPad'i kullanarak bir invertör tasarlamak istiyorum (PCFA'daki Proje DSP TMS320F28335'i Kullanıyor), önceki kartı nasıl kullanacağımı veya temel bileşenleri nasıl dışa aktaracağımı öğrenmem gerekiyor. Projede mosfet sürücüsü ve mosfet tasarlamak istiyorum ama mosfet'in LaunchPad ile nasıl kullanılacağı bir çözüm sağlayabilir. Osiloskoptan gözlem yapamadım, voltaj değerlerini ölçemedim. Bir motor mosfet döndürmek istedim ve ardından LaunchPad hasar gördü, neyi yanlış yaptığımı anlayamıyorum, frekansla ilgili olabilir mi? Bana yardımcı olur musunuz lütfen devre şemasını sizinle paylaşıyorum.

over 3 years ago

0 Swathy Lal over 3 years ago

TI__Prodigy 160 points

Hi,

Please re-post the thread in English as we don't support non-English queries in this portal

Thanks

0 Semanur Akyüz over 3 years ago in reply to Swathy Lal

Prodigy 40 points

Hello, first of all I wish you a good day. I want to design an inverter using TMS320F28379D LaunchPad (Project DSP in PCFA Uses TMS320F28335), first I need to learn how to use the board, basic circuit usage and basic coding methods. I want to design mosfet driver and mosfet in project but I couldn't find exactly how to use mosfet with LaunchPad. I could not observe from the oscilloscope, I could not measure the voltage values because tms320f28379d was broken. I wanted to spin a motor using mosfet and TMS320F28379D LaunchPad and the mosfet was broken then the LaunchPad got damaged I can't understand what's wrong, could it be frequency related? What should I pay attention to when choosing a mosfet? I would be glad if you help me. I am sharing the circuit diagram with you.

0 Kevin Allen18 over 3 years ago in reply to Semanur Akyüz

TI__Mastermind 45606 points

Hi,

For software you can install and use the C2000WARE-MOTORCONTROL-SDK. You'll need a gate driver between the MCU and MOSFETs in your ivnerter. You can reference TI inverter boosterpacks for hardware, like BOOSTXL-DRV8323RS.

Best,

Kevin

0 Semanur Akyüz over 3 years ago in reply to Kevin Allen18

Prodigy 40 points

I need a gate driver between the MCU and MOSFETs in the connector but I want to build this circuit myself. I'm having trouble using mosfets with the TMS320F28379D LaunchPad. What should I pay attention to when choosing a mosfet?

+1 Kevin Allen18 over 3 years ago in reply to Semanur Akyüz

TI__Mastermind 45606 points

Hi,

I think this question would be handled better by the Gate Driver team rather than C2000. They have some App Notes and videos to assist with selection and learning:

Best,

Kevin

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D:TMS320F28379D LaunchPadxl