TMS320F280025C-Q1: CAN module not working in F280025C_UNIVERSAL MOTOR CONTROL PROJECT

Bhuvaneshwaran M

we are working f280025c launch pad lit in CAN module which is having ECM transceiver ic .

but now we have changed transceiver IC (TJA1042) , when we connected board muc not generate TX and Rx signal , kindly give

over 2 years ago

0 Hareesh Janakiraman over 2 years ago

TI__Guru* 95315 points

Please download my Application report http://www.ti.com/lit/SPRACE5. and look at the Debug tips provided. Most CAN issues can be resolved by going through this checklist.

0 Hareesh Janakiraman over 2 years ago in reply to Hareesh Janakiraman

TI__Guru* 95315 points

Bhuvaneswaran,

I presume you were able to resolve the issue and hence closing this post.

0 Hareesh Janakiraman over 2 years ago in reply to Hareesh Janakiraman

TI__Guru* 95315 points

Bhuvaneswaran,

You have rejected my response without providing any reason. Please let me know how I can help you better.

0 Hareesh Janakiraman over 2 years ago in reply to Hareesh Janakiraman

TI__Guru* 95315 points

Bhuvaneswaran,

I presume you were able to resolve the issue and hence closing this post.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280025C-Q1: CAN module not working in F280025C_UNIVERSAL MOTOR CONTROL PROJECT