Other Parts Discussed in Thread: UCD7138
Hi, TI staff
I would like to know what the Q11 and Q 13 are used for in the schematic of TIDM-1001 design.
Thank you so much.
Jinghang
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jinghang,
The original h/w designer is not in TI. You may want to check with UCD7138 team in the forum and see if they have some comment. Or you can also check UCD7138 datasheet on the external circuit.
Regards,
Chen