• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 303 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSCNCD280039C: Can the Control Card be used with PMP23126 and TIDM-02000?

Robert Finger
Genius 17577 points
Part Number: TMDSCNCD280039C
Other Parts Discussed in Thread: PMP23126, TIDM-02000, , C2000WARE

Hi,

One of my customers is looking at our reference designs PMP23126 and TIDM-02000. But their target MCU is F280039C. Could the TMDSCNCD280039C be used on those two ref designs? What about SW support, anything special to consider?

Thanks,
  Robert

  • +1
    TI__Mastermind 29491 points

    Robert,

    Definitely yes for PMP23126 since I know there was some work done to enable F280039C controlCARD on that design (not released).

    Very likely yes on TIDM-02000. Looking through the design guide key signals, all can be supported on the F280039C controlCARD.

    Regarding SW support, some migration would obviously be needed (pin mux, command files, c2000ware libraries, etc.), but nothing special.