• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 631 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F280039C: LAUNCHXL-F280039C FLASH PROGRAMMING PROCEDURE

Devershi Singh
Prodigy 110 points

Part Number: LAUNCHXL-F280039C

Dear Sir,

Kindly Share the STEP BY STEP  Flash Programming Procedure for LAUNCHXL-F280039C development board using CCS STUDIO IDE.

If possible share the Screenshot /Video or Flash Programming Document.

  • 0
    TI__Guru* 87155 points

    Hi Devershi,

    CCS will automatically invoke the flash programmer (and programs the application executable in to flash memory) when it notices that application is mapped to the flash.  There is no need for you to do anything special to invoke flash programming.

    Did you already try programming any application mapped to flash memory?  Did you face any problems?

    Thanks and regards,
    Vamsi

  • 0 in reply to Vamsi Gudivada
    TI__Guru* 87155 points

    Hi Devershi,

    I am closing this post since I did not hear back from you.

    If you have further questions, please open a new post as needed.

    Thanks and regards,
    Vamsi