We have a two CPU design with one of the CPU as TMS320F2800157. The DSP is connected another CPU through UART for communication.
Does TMS320F2800157 support boot from UART?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We have a two CPU design with one of the CPU as TMS320F2800157. The DSP is connected another CPU through UART for communication.
Does TMS320F2800157 support boot from UART?
Hi Chang,
Thanks for your question. Yes, boot from UART is supported, see the guide here:
If you have any questions with this guide, please post a new question with the title "Serial Flash Programmer - {INSERT QUESTION HERE}" to have Serial Flash Programmer expert assist with your question.
Regards,
Vince