• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 130 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D: Include path when changing the PC

Anoop kumar N
Expert 1008 points
Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Hello Experts

When i changing the PC every time, i need to include the below directory in my CCS project properties. is there any solution to avoid the directory updation when changing from PC to PC. (suppose if i am working on PC which do not have c2000ware) 

Regards

Anoop

  • 0
    TI__Mastermind 30185 points

    Hello Anoop,

    If you're trying to move a project from one PC to another, you can just select the appropriate Export options as they appear to make sure the file paths are resolved.

    Anoop kumar N said:
    suppose if i am working on PC which do not have c2000ware

    If you don't have C2000Ware then you can remove these paths when you exclude the project, although if you don't have C2000Ware then I'm not sure why these paths are in your Project Properties in the first place. There will be no way to compile the project if it uses C2000Ware and the PC doesn't have C2000Ware installed.

    Best regards,

    Omer Amir