This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi all,
I just started using TMS320F28388D Control card. I'm facing some issues in loading code into CPU2 and CM. I'm able to check the peripherals related to CPU1 only. I'm not able to use CPU2 and CM. Please help me in loading code into CPU2 and CM.
Thanks in advance,
Sudheer Kumar Gundu
Hi Sudheer,
We need to know what kind of issue you are facing to suggest something. Please mention the steps you are following and the error msg you are getting.
Vivek Singh
Hi Vivek,
Actually, we tried to use example file from C2000Ware, and from the comments mentioned in some example files we tried to use
Device_bootCPU2(BOOTMODE_BOOT_TO_FLASH_SECTOR0); for initializing CPU2. While loading it onto control card I'm getting like CPU2 is out of reset and configured to wait boot.
Still not clear on the issue you are facing. What message you get when try to load the code ?
Hi.
Are you still have this issue ? If yes, please provide additional detial.
Vivek Singh
Hi Vivek,
I got my issue resolved with the help of my colleague.
Thanks
Sudheer Kumar Gundu