• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 301 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

flash memory programming

Bassim Jassim
Prodigy 130 points
Other Parts Discussed in Thread: TMS320F28335

Hi

I am working with TMS320F28335.  I used internal RAM for programming  with CCS and I will  control relatively high voltage converter ( about 200V). My questions are

1- Is there any expected problem with such situation?.

2- Is it necessary to use flash memory for programming?.

Many thanks 

  • 0
    TI__Guru 55700 points

    Bassim,

    I have not quite understood your question. But, once you are able to successfully build a project, you can easily change the linker command file (.cmd) file to execute the code out of RAM (or) flash.

    Please clarify your question to allow us help better.

    Regards,

    Manoj

     

  • 0
    TI__Guru** 119670 points

    Bassim,

    Recommend you using isolation between your PC and the hardware. This may be built onto the interface to the HW already (PC USB - USB-JTAG ---- Isolation ---- JTAG C2000) or available as an option for an external emulator (PC USB - USB JTAG EMULATOR ----- ISOLATION ------ JTAG C2000)