Can you please share the step by step procedure to flash the program. Currently i running from the RAM
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can you please share the step by step procedure to flash the program. Currently i running from the RAM
Hi Vishnu,
Please refer section "6.2.4 Running serial_flash_programmer for F2837xD (Flash Kernel B)" in document at ti.com/lit/sprabv4 it has all the steps listed.
Let me know if you face any issue.
Regards,
Rajeshwary