TMS320F28035

Ronodeep Daityari

Whenever i am building my code on piccolo f28035 with CCS v4.0 debudder i am gettin 1 error datz [E3000] n den nothn is notified, toyally empty. so i am not able to find whats actlly wrong...i think it is related to the CLA codepart but not sure..can anyone pls help me out???

over 14 years ago

0 ChrisClearman over 14 years ago

TI__Guru** 119600 points

probably not enough data here to point you in the right direction, but I would use CCSv4.2 (4.0 was not stable for me)

http://processors.wiki.ti.com/index.php/Download_CCS

0 Ronodeep Daityari over 14 years ago in reply to ChrisClearman

Prodigy 40 points

Exactly the same thing is bugging me too, there isn't enough data to analyse it. The error is showing in line 0 & there is no index also for the error now when i am building it!!

0 Manoj Santha Mohan over 14 years ago in reply to Ronodeep Daityari

TI__Guru 55700 points

Ronodeep,

If this issue is not yet resolved, i would recommend you to post the same question in CCS forum. I guess they should be able to help you.

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81.aspx

Regards,

Manoj

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28035