• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 312 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28035: How to migrate the motor control algorithm from TMS320F28027 to TMS320F28035?

Winni long
Prodigy 120 points
Part Number: TMS320F28035
Other Parts Discussed in Thread: TMS320F28027,

How to migrate the motor control algorithm from TMS320F28027 to TMS320F28035.

We have successfully run the motor control algorithm on TMS320F28027, if you want to use the control software to run on TMS320F28035, how to migrate, what are the precautions?

Because the driver module is the same module, but the control chip is replaced, I want to know where the migration difference between the two chips is.

The requirement is to migrate to TMS320F28035 and not consider using other controllers at this time.

In addition to the GPIO configuration needs attention, what else needs special care?

  • 0
    TI__Expert 5650 points

    Hi Winni,

    The device F28027 and F28035 should be very similar and easy for migration. I think just paying attention to the peripheral configurations would be good enough. If there are any questions during development, please feel free to reach out.

    Thanks,

    Jiaxin