TMS320F280039: TMS320F280039C

NAJMA JOSE

Part Number: TMS320F280039
Other Parts Discussed in Thread: UNIFLASH

Hello,

We are using the XDS110 debug probe and is seeing the following issue during debug session. The target is getting disconnected.

thanks

Najma

over 1 year ago

0 Vivek Singh over 1 year ago

TI__Guru** 115281 points

Please refer this document for initial debug.

Regards,

Vivek Singh

0 NAJMA JOSE over 1 year ago in reply to Vivek Singh

Intellectual 300 points

Hello Vivek,

We are able to program the C2000 device on our board via JTAG - either through CCS or UniFLash. But the target is getting disconnected in the middle of a debug session on CCS.

We have a cJTAG header on our board and it is connected to the XDS110 debug probe.

thanks

Najma

0 Vivek Singh over 1 year ago in reply to NAJMA JOSE

TI__Guru** 115281 points

It could happen because of the noise impacting the JTAG signals on the board. It'll be good to check for that on the board.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280039: TMS320F280039C