• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 187 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F2800137: How to use emulator to write the DSP when the DSP is already encrypted.

Joe Ji
Expert 3840 points
Part Number: TMS320F2800137

HI Team

Customer cannot use emulator to connect to the DSP after it is encrypted and cannot over write the flash. Could you please help to check this issue?

Thanks and best regards

Joe

15th April

  • +1
    TI__Guru** 115281 points

    I assume when you say DSP is encrypted meaning DSP is locked using 128bit CSM password. If yes, then user need to use wait bootmode to be able to connect to CCS. Also user need to unlock the DSP after connecting to CCS to be able to program the flash.

    Vivek Singh