TMS320F2800137: Application issues

Reed

Expert 2080 points

Part Number: TMS320F2800137
Other Parts Discussed in Thread: C2000WARE, LAUNCHXL-F2800137

Hi,

use F2800137, below SDK,

\C2000\C2000Ware_MotoControl_SDK_4_02_00_00\solutions\un...\f280013x

After compiling and burning, it was found that F2800137 could not be detected.
Discovered that the software is occupying the burning I/O port.
How to fix those undetectable F2800137?

over 1 year ago

0 Skyler Baumer over 1 year ago

TI__Expert 6545 points

Hello,

Can you try using the most recent release (5.02.00.00)? Here is the link: https://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

Could you clarify what you mean by the software occupying the I/O port? Also, please attach a screenshot of the error.

Kind regards,

Skyler

0 xinkai bu over 1 year ago in reply to Skyler Baumer

Prodigy 110 points

Hello,

I/O port：GPIO35,GPIO37 defined as IO port in the program.

The current problem is how to solve the unrecognizable chips？

0 xinkai bu over 1 year ago in reply to xinkai bu

Prodigy 110 points

0 Skyler Baumer over 1 year ago in reply to xinkai bu

TI__Expert 6545 points

Hello,

Is there an error message that appears when you try to connect to the device? Can you run try the "Test Connection" button within the .ccxml file that you have for the F280013x?

Kind regards,

Skyler

0 xinkai bu over 1 year ago in reply to Skyler Baumer

Prodigy 110 points

What is the function of flagenableForceAngle? When it defaults to flagenableForceAngle=true, the fan will sway left and right at the moment of startup (there is a chance of it happening, most start smoothly. When I open obj ->flagenableAlignment=true, the duration is 2 seconds, and the probability of swaying left and right is slightly reduced), sometimes even for a long time. What parameters can be adjusted to optimize this phenomenon.

0 Joe Prushing over 1 year ago in reply to xinkai bu

TI__Genius 16541 points

Hello Xinkai, I apologize for the delay on this thread. Is this issue still open?

0 xinkai bu over 1 year ago in reply to Joe Prushing

Prodigy 110 points

The startup issue has been resolved.

Now there is a question: I have applied for two development boards: LaunchXL-F2800137, boostXL-DRV8323RX, The project is universal_motorcontrol_lab_f280013x [Active-Flash_lib-DRV8323RS-3SC], and compiling and burning can sample bus voltage,

The current and voltage of the three-phase are not collected correctly, I don't know where it is.

0 Skyler Baumer over 1 year ago in reply to xinkai bu

TI__Expert 6545 points

Hi Xinkai,

Please open up a new thread for this question

Kind regards,

Skyler

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2800137: Application issues