• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 312 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280039C: Error in loading Sysconfig file

Geetha Priya Sivasankar
Prodigy 40 points
Part Number: TMS320F280039C
Other Parts Discussed in Thread: SYSCONFIG, POWERSUITE

Tool/software:

Hi,

I'm using the F28004x TIDM DC-DC buck example and migrating it to F280039C control card board. I followed the steps as mentioned in this migration tutorial video https://www.ti.com/video/6309991000112 . But, I'm facing issue in opening the sysconfig file (as shown below) after copying it from the F28004x DC-DC buck example. Requesting help on how this could be resolved.

Thanks,
Geetha Priya

  • 0
    TI__Intellectual 2266 points

    Hi Geetha,

    I apologize for the late reponse,

    TIDM_DC_DC_BUCK uses a different sysconfg-based GUI called powerSUITE, which is not the same as C2000 sysconfig. Therefore steps in the aforementioned video won't work with powerSUITE. Nonetheless, can you tell me what steps you took to get the error message?

    To migrate a solution from DPSDK with powerSUITE support would require you to swap out the driverlib,linker,codestart from the device folder to the new device, and change the implementation of hal files (buck_hal.h/.c) and user settings (buck_user_settings.h) to utilize the different periperials from the new device. This would be a bit of mannual effort unfortuantely.

    Best,

    Sen Wang