• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 212 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSHVMTRINSPIN: TMS320C2000

Nazario Malerba
Prodigy 30 points
Part Number: TMDSHVMTRINSPIN
Other Parts Discussed in Thread: CCSTUDIO,

Tool/software:

Dear all,

I've a problem on control card configuration using launcher GUI INSTANSPIN-MOTION.

I've followed al connection setting (Jump populetd) descripted on Hardawere Setting guide but when I connect USB cable from J1 connection on F2806x ISO controlCARD to my PC, following error message appear:

"Connecting target: Texas Instruments XDS100v2 USB Emulator_0/C28xx
sun.org.mozilla.javascript.internal.WrappedException: Wrapped com.ti.ccstudio.scripting.environment.ScriptingException: Error connecting to the target: emulation failure occurred (<Unknown source>#14) in <Unknown source> at line number 14Restart Completed"

When error appear motor control kit is not connected on power supply 230VAC.

Please give me info how to solve error

Thks

  • +1
    TI__Mastermind 45586 points

    Hi,

    Nazario Malerba said:
    I've followed al connection setting (Jump populetd) descripted on Hardawere Setting guide but when I connect USB cable from J1 connection on F2806x ISO controlCARD to my PC, following error message appear:

    Are you powering the TMDSHVMTRINSPIN board as well? Note that the F2806x ISO controlCARD needs to be powered from the system side, just connecting the USB to your PC will not power the F2806x side of the board.

    Best,

    Kevin