TMS320F280039C: bin file data and flash data not align using Uniflash 8.2.0.4220

Joe Ji

Part Number: TMS320F280039C
Other Parts Discussed in Thread: UNIFLASH, C2000WARE

Tool/software:

Hi Team

Customer test the firmware download with NIFLASH 8.2.0.4220, the GUI shows download success but the bin dumped from flash is different from the original bin, please see picture below:

left is original bin, right is bin dumped from flash.

is there anything can be checked?

Thanks and best regards

Joe

over 2 years ago

+1 Charles Roberson over 2 years ago

TI__Genius 15080 points

Hi Joe,

I see the Uniflash version you mentioned using is 8.2.0.4220. Does this same issue occur in the latest Uniflash version (8.7.0)?

Does this occur when trying to flash the bin for an existing example (ex. LED Blinky)?

Thanks and regards,

Charles

0 Joe Ji over 2 years ago in reply to Charles Roberson

TI__Expert 4350 points

Hi Charles

Customer updates to V8.7 Uniflash, but still see the issue once, that dump code not align with the image.

Does other customer report the issue? It's there any update plan for this issue?

Thanks

Joe

0 Ki over 2 years ago in reply to Joe Ji

TI__Guru**** 484881 points

Hi Joe,

What exact device is the customer using? And can they share the binary (you can send it to me by private E2E message).

Also, did the customer try reproducing with an existing C2000Ware example as suggested by Charles earlier?

Thanks

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280039C: bin file data and flash data not align using Uniflash 8.2.0.4220