• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 348 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28375S: Debugging with inbuilt xds100v2 debugger of Launchpad F28379D

Muzammil Qureshi
Intellectual 280 points

Part Number: TMS320F28375S
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Hello Team,

I have LaunchPad F28379D and PCB with TMS320F28375S. Can I debug the TMS320F28375S Controller with inbuilt debug probe xds100 v2 of launchpad? if yes, then what is the procedure for that?

thanks and regards

Muzammil Qureshi

  • +1
    TI__Mastermind 36526 points

    Hi Muzammil,

    Technically this is possible, but I would not recommend it.

    You would need to connect TRST, TCK, TMS, TDI, and TDO from the launchpad to the F28375S on your new PCB. You would also need to somehow sever the connection between these signals and the F28379D on the launchpad. 

    The schematic for the launchpad is available online and in [c2000ware]/boards/. This seems very tedious, and you will disable the launchpad. I recommend that you purchase a standalone xds100v2.

    Best Regards,

    Ben Collier