TMS320F28386D: Warning message not clear

Hi Vivek,

I have checked this in C2000Ware Version 5.02 and CCS version 12.7 but i am not able to reproduce the warning.

Which CCS and SDK version are you using?

Thanks

Aswin

I raised this ticket for compiler team. This is not an issue with C200Ware.

You can reproduce this issue by following the steps mentioned in below E2E from customer -

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1371359/tms320f28386d-dcsm-cmd

Vivek Singh

The most likely explanation is that the memory ranges given in the diagnostics do not match what is specified in the ROMS directive in the hex utility (not linker) command file.

If that doesn't explain it, then please submit a test case.  I do not need the CCS project.  I need the text (not a screenshot) of the hex utility command, plus every file that command uses.  Put all the files in a zip and attach it to the next post.

Thanks and regards,

-George

George,

Below is the hex utility command -

Building secondary target: "boot_ex1_cpu1_cpu2_cm_secure_flash_cpu1.hex"
Invoking: C2000 Hex Utility
"C:/ti/ccs1220/ccs/tools/compiler/ti-cgt-c2000_22.6.1.LTS/bin/hex2000" --cmac="C:/Users/a0875069/workspace_v12/boot_ex1_cpu1_cpu2_cm_secure_flash_cpu1/boot_ex1_user_cmac_key.txt" --image --memwidth=16 --romwidth=16 "C:/Users/a0875069/workspace_v12/boot_ex1_cpu1_cpu2_cm_secure_flash_cpu1\boot_ex1_flash_hex_lnk_cpu1.cmd" --diag_wrap=off -o "boot_ex1_cpu1_cpu2_cm_secure_flash_cpu1.hex" "boot_ex1_cpu1_cpu2_cm_secure_flash_cpu1.out"

Attached is the zip file with all required files -

All_files.zip