TMS320F28388D: Local Signals and Mux Selection Tables ECAPs

Ed Sanders

Tool/software:

Greetings,

I am looking at the Local Signals and Mux Selection tables (Table 9-5) and Select Value 11 vs 12-17 for CLB7 and CLB8. In the Select Value row 11 CLB7 shows ECAP6. But all the other ECAPs for CLB 7 are labeled ECAP5. And with CLB8, ECAP7, all the others are ECAP6. Should all the CLB7 ECAPs be ECAP6 and all the CLB8 ECAPs be ECAP7?

Thank you,

over 2 years ago

+1 Luke Jones over 2 years ago

TI__Mastermind 28580 points

Hi Ed,

This is an error in the TRM, for CLB1-4, the ECAPs should be ECAP1, ECAP2, ECAP6, ECAP7, respectively. For CLB5-8, the ECAPs should be ECAP3, ECAP4, ECAP5, ECAP6. This will be corrected in the next revision of the TRM.

Thank you,

Luke

0 Ed Sanders over 2 years ago in reply to Luke Jones

Genius 4295 points

Thank you Luke.

Just to be clear, ECAP6 is common between CLB1-4 and CLB5-8?

Thank you,

0 Luke Jones over 2 years ago in reply to Ed Sanders

TI__Mastermind 28580 points

Yes that's correct

0 Ed Sanders over 2 years ago in reply to Luke Jones

Genius 4295 points

Great! Thank you Luke.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28388D: Local Signals and Mux Selection Tables ECAPs