Interface CCS 3.3 with RTRT

Ganeshkumar Patil

This is regarding RTRT-TDP for CCSv3.3, by using your command file we are able to create executable in RTRT. And the same executable using CCS debugger we are unable to download to the target and facing following Loader problem.

“Loader: One or more sections of your program falls in to memory region that is nor writable. The regions will not actually be written to the target. Check your configuration and/or memory map”

For your reference please find the error screen shot, which is attached herewith.

over 14 years ago

0 Vishal_Coelho over 14 years ago

TI__Mastermind 20850 points

OK it looks like its trying to load the .text section to FLASH at 0x310000. It could be that you are attempting to load to flash while it is secured. The GEL file should automatically unlock the device to allow you to program it. So Id check that first.

Could you also try loading another FLASH based project to see if the problem persists.

0 Manoj Santha Mohan over 14 years ago in reply to Vishal_Coelho

TI__Guru 55700 points

Which device are you trying to program the TestRT.out? It is possible that the device you are using doesn't have valid memory location in 0x310000

-Manoj

C2000™︎ microcontrollers

C2000 microcontrollers forum

Interface CCS 3.3 with RTRT