TMS320F28379D: CCS build fails on all source files with the message "make (e=267) The directory name is invalid."

Hello,

Can you provide the full output in the build console?

Thanks

ki

The full output of the build attempt from the Console panel of CCS is in the attached ZIP file.CCS12.4_buildFailure_Console_20240829.zip

Can you also provide the output of build configuration that builds successfully (from the same project of course).

The first (failing) build configuration was for a TI controlCARD, indicated by the _CC tag on the build configuration name. All other build configurations build successfully. Here is an example with a _LXL tag on the build configuration name, intended to run on a LaunchXL-F28379D card. The primary difference between the two is GPIO pin assignments tailored to what is available on each card.    CCS12.4_buildSuccess_Console_20240830.zip

Thanks, I will take a look. Please note that it is a local holiday here so I will take a look tomorrow when I am back in the office.

Understood. Thanks, Ki, for looking into this. 

I took a look at the logs and can't understand why that one configuration is failing to build. I don't see anything wrong with it based on the output. Would it be possible to share the project? I actually just need the three .*projects in the project folder for now. If you wish to share privately, please start a private E2E conversation with me.

Thanks

ki