TMS320F28P650DK: CCSTUDIO: How include #include "f28x_project.h"

User3728

Part Number: TMS320F28P650DK
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Hi,

I need help to include "f28x_project.h" correctly.

If I import a sample project that contains a syscfg (here I imported spi_ex4_external_loopback_fifo_interrupt.c) I unfortunately cannot use #include "f28x_project.h".

This then gives the following error:

So I imported C:\ti\c2000\C2000Ware_5_02_00_00\device_support\f28p65x\headers\include. Now the following errors occur:

If I only #include "f28x_project.h" and comment out the others, no error message appears. So I only get this if I try to include all four.

Does anyone know how to do this?

over 1 year ago

0 Ryan Ma over 1 year ago

TI__Mastermind 27736 points

Hi,

Can you follow this walk through on how to enable bitfield in a driverlib based project.

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1320651/faq-c2000ware-compiler-errors-when-using-bitfield

Best,

Ryan Ma

0 User3728 over 1 year ago in reply to Ryan Ma

Prodigy 105 points

I have now added the files as in your post. Unfortunately, it still has errors:

+1 Ryan Ma over 1 year ago in reply to User3728

TI__Mastermind 27736 points

Hi,

I followed the steps outlined in the FAQ. I noticed one additional step that is needed. You will need to add this pre defined symbol _DUAL_HEADERS. There was conflict between adc defined variables between driverlib and the device support files.