TMS320F28335: TMS320F28335

Felix Valladares

Tool/software:

Dear TI support,

I created a project using Code Composer 11.2.0.00007 which targets TMS320F28335 part. Compiler is v21.6.0 LTS.

My project, which is a motor control project, has been working fine for several months. The application runs off Flash memory.

I tried to build the project yesterday and got the following error message:

gmake: ***No rule to make target "all"

I checked my project properties repeatedly, but everything looks fine. Nothing has changed.

It looks I cannot get rid of this error. Do you know which may cause this error?

I will appreciate your help.

Thanks,

Felix V.

over 2 years ago

0 Ki over 2 years ago

TI__Guru**** 485921 points

Hello,

Can you try cleaning your workspace and then reimporting it?

https://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_troubleshooting.html#clean-the-workspace-or-try-using-a-new-one

Thanks

0 Felix Valladares over 1 year ago in reply to Ki

Intellectual 280 points

Thanks Ki for the information. Before I read your message, I had re-installed Code Composer and this fixed the problem. I haven't tried what you suggest so I don't know if it works. However, the mentioned error message occurred with multiple workspaces. Cleaning every workspace and re-importing seemed a lot of work.

I appreciate your help,

Felix

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28335: TMS320F28335