• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 271 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28379D: SCI module generated by PSIM (simcoder) as a ccs project

Sumit B
Prodigy 230 points
Part Number: LAUNCHXL-F28379D
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Hello there,

I was wondering if some has any experience working with ccs project that has sci module generated from PSIM?

Actually what I am trying to do is have C code generated (CCS project) that has SCI module from PSIM running on one launchxl-f28379d and trying to establish sci communication with other launchxl-f28379d.

Any guidance would be appreciated.

Thanks,

  • 0
    TI__Mastermind 24370 points

    Hi Sumit,

    Unfortunately, I cannot speak to any PSIM-specific queries. If you are looking for C-code to reference for using the SCI module, please see our SCI software examples within two locations in the C2000Ware SDK: 

    • {C2000Ware}\driverlib\f2837xd\examples\cpu1\sci
    • {C2000Ware}\device_support\f2837xd\examples\cpu1

    For details on the SCI module design/functionality, please use the device reference manual SCI chapter. 

    If you have any more specific questions on those examples or usage of the SCI module, feel free to follow up here. 

    Best Regards,

    Allison