TMS320F280025C: SPINNING BLDC

Dinesh n

Part Number: TMS320F280025C
Other Parts Discussed in Thread: C2000WARE-MOTORCONTROL-SDK, C2000WARE

Tool/software:

I'm trying to run 24v BLDC motor on online universal instaSPIN FOC GUI to identify the motor using TMS320F280025C and DRV8316R EVM hardware status shows as connected but Bus voltage(v) shows nothing so motor not spinning.

over 1 year ago

0 Yanming Luo over 1 year ago

TI__Guru** 116090 points

Seems like there is any InstaSPIN GUI for TMS320F280025C and DRV8316R. You may follow the guide below to implement the project for TMS320F280025C and DRV8316R.

You may refer to the lab for the C2000 devices in motor control SDK. The universal motor control lab is available in the current MCSDK, which can support a set of hardware kits and control algorithms for BLDC/PMSM drive. The kits include LAUNCHXL-F280025C with DRV8316REVM inverter board for low voltage motor. The control algorithms include sensorless InstaSPIN-FOC with FAST, Sensorless-FOC with eSMO, Sensored-FOC with incremental encoder, Sensored-FOC with hall sensor.

C2000WARE-MOTORCONTROL-SDK: https://www.ti.com/tool/C2000WARE-MOTORCONTROL-SDK

Universal Project and Lab User’s Guide: https://www.ti.com/lit/spruj26

Example lab project at the folder: C:\ti\c2000\C2000Ware_MotorControl_SDK_<version>\solutions\universal_motorcontrol_lab\f28002x

0 Dinesh n over 1 year ago in reply to Yanming Luo

Prodigy 60 points

thanks i got all my answers on Motor Control SDK Universal Project and Lab doc.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280025C: SPINNING BLDC