TMS320F28379D: How to implement a logic function?

Hongmei Wan

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Hi,

Does the TMS320F28379D has logic function/block to use? For example, GPIO-40, GPIO41 are fault signals received from outside and I want to "AND" them to make one signal before using it (I don't want to use if-statement).

Thanks,

Hongmei Wan

over 1 year ago

0 Delaney Woodward over 1 year ago

TI__Mastermind 21040 points

Hi Hongmei,

I believe this functionality is possible with the CLB module. I will loop in the CLB expert to comment.

Best Regards,

Delaney

0 Luke Jones over 1 year ago in reply to Delaney Woodward

TI__Mastermind 28220 points

Hi Hongmei,

The CLB can do this very easily. I would recommend referring to the combinational logic example in C2000Ware and the CLB Tool user's guide. Let me know if you need additional assistance.

Thank you,

Luke

0 Hongmei Wan over 1 year ago in reply to Luke Jones

Intellectual 720 points

Thanks a lot! Could you please let me know where to find these, one of the example in C2000Ware and the CLB Tool user's guide?

+1 Luke Jones over 1 year ago in reply to Hongmei Wan

TI__Mastermind 28220 points

Hi Hongmei,

The CLB examples can be found in C:\ti\c2000\C2000Ware_5_04_00_00\driverlib\f2837xd\examples\cpu1\clb

The CLB Tool user's guide can be found here:

https://www.ti.com/lit/ug/spruir8b/spruir8b.pdf?ts=1732557746121

Thank you,

Luke

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: How to implement a logic function?