TMS320F28375D: Debug Issue

Lawrence Wong

Genius 14910 points

Part Number: TMS320F28375D

Tool/software:

Customer running into the following debugger issue and looking for gudiance on how to resolve:

Setup information:

16 days ago

0 Luke Jones 13 days ago

TI__Mastermind 20470 points

Hi Lawrence,

Can you provide more information about what the application code is doing? Is it attempting to use CPU2 in some fashion? I would recommend referring to our IPC/dual-core examples for proper usage of both cores.

Thank you,

Luke

0 Lawrence Wong 13 days ago in reply to Luke Jones

TI__Genius 14910 points

Hi Luke,

The issue is there should not be any IPC as the application is only running on the single core. Is it the GEL script doing this?

Regards,

Lawrence

0 Luke Jones 12 days ago in reply to Lawrence Wong

TI__Mastermind 20470 points

Did the customer attempt to upload code to both CPU1 and CPU2 at some point by leaving both cores checked? If so, could they erase the flash contents of both CPUs via the On-Chip flash tool and try reloading their application to CPU1 only?

Thank you,

Luke

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28375D: Debug Issue