Other Parts Discussed in Thread: C2000WARE, SYSCONFIG,
Tool/software:
Hello Team,
I am woking on eval kit LAUNCHXL-F28P65X with TMS320F28P65DK9 controller. I am woking on MCAN module and to do the intial bring up I had tried exmple codes provided in package C2000Ware_5_03_00_00. I have tried mcan_ex1_loopback & mcan_ex3_loopback_sysconfig but for me it was not working. To debug I have checked for register settings, I have checked MCAN_TXBAR & MCAN_TXBRP but did not observe any change even after using breakpoint inside function. I have also checked for register MCAN_PSR and found that LEC was 7 & Node is in IDLE state. I did not found anything wrong in configuration.
Is there anything wrong in HW or any settings on HW should be changed like jumper settings?
Requesting you to help on this asap.
Best Regards,
Rohit
