TMS320F280039C：How to simulate DSSI Sample code? - C2000 microcontrollers forum - C2000™︎ microcontrollers

C2000 microcontrollers forum

State Resolved
Locked Locked
Replies 12 replies
Answers 2 answers
Subscribers 82 subscribers
Views 464 views
Users 0 members are here

Support feedback

Options

CHIEH-YU LIU

Prodigy 30 points

Part Number: TMS320F280039C
Other Parts Discussed in Thread: C2000WARE

Tool/software:

I have received a sample code for DSSI from your company but am unsure how to use it. Are there any operation manuals or step-by-step instructions available?
What version of CCS or above is required to use this sample code?

11 months ago

0 CHIEH-YU LIU 11 months ago

Prodigy 30 points

I have only used CCS v3.3 before, and the current CCS v12.8.1 version is quite different, so I’m not very familiar with the operations. I’d like to ask if there is a user manual available.

0 Ryan Ma 11 months ago in reply to CHIEH-YU LIU

TI__Mastermind 27636 points

Hi Chieh-yu Liu,

What sample code did you receive? Is there for a vst plugin?

Are you referring to DSS or DSSI?

https://software-dl.ti.com/ccs/esd/training/workshop/ccsv9/dss_fundamentals_workshop.html

Best,

Ryan Ma

0 CHIEH-YU LIU 11 months ago in reply to Ryan Ma

Prodigy 30 points

Hi Ryan Ma,

We now need our power supply to comply with the DSSI functionality requirements in the MCRPS standards.

sci_brkdet_monitor_method 2 with CLB.zip

0 CHIEH-YU LIU 11 months ago in reply to Ryan Ma

Prodigy 30 points

Hi Ryan Ma,

Could you please also provide me with the C2000 device GUI?

0 Ryan Ma 11 months ago in reply to CHIEH-YU LIU

TI__Mastermind 27636 points

Hi Chieh-yu Liu,

I see, you're asking about sci. I will forward this thread to the SCI expert so they can further assist you.

Best,

Ryan Ma

0 Gus Martinez 11 months ago in reply to Ryan Ma

TI__Mastermind 29721 points

CHIEH-YU LIU said:
I have received a sample code for DSSI from your company but am unsure how to use it. Are there any operation manuals or step-by-step instructions available?
What version of CCS or above is required to use this sample code?

I'm not familiar with this particular example code. However, in terms of how to use it, you should be able to load it using your CCS v12 version or any later revision. If you are unfamiliar with this CCS revision, you can refer to the C2000ware academy, part 1 below.

https://dev.ti.com/tirex/explore/node?node=A__AEIJm0rwIeU.2P1OBWwlaA__C28X-ACADEMY__1sbHxUB__LATEST

0 CHIEH-YU LIU 11 months ago in reply to Gus Martinez

Prodigy 30 points

Hi Gus Martinez,

When using this particular example code to debug the project, the following error appears: 'launch.json' is not a valid JSON file.

Missing debug configuration properties. How can I resolve this?

0 CHIEH-YU LIU 11 months ago in reply to Gus Martinez

Prodigy 30 points

+1 Gus Martinez 11 months ago in reply to CHIEH-YU LIU

TI__Mastermind 29721 points

Which CCS version are you using? Did you use the "import project" feature to add the project source code to the workspace?

I am able import the project on CCS 20.0. I don't have a controlCARD handy, but it does seem I can launch the CCS session.

+1 CHIEH-YU LIU 11 months ago in reply to Gus Martinez

Prodigy 30 points

Hi Gus Martinez,

I am also using CCS version 20.0 to open the file, and at the same time, I am using the import project feature.

+1 CHIEH-YU LIU 11 months ago in reply to Gus Martinez

Prodigy 30 points

I can use the 'Build ALL' and 'Build Project' functions, but I am unable to use the Debug Project feature.

0 CHIEH-YU LIU 11 months ago in reply to Gus Martinez

Prodigy 30 points

The error was caused by a space in the folder name.