TMS320F280049C: Controller package automatically changes back to 100 PZ from 56 RSH

Vijayaraj Wali

Prodigy 20 points

Part Number: TMS320F280049C
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Able to import projects from C2000Ware_5_03_00_00

Able to Compile and use

However, when changed the controller to 56 RSH,

controller get updated to 56 RSH, gets saved, rebuild also works fine

but after closing and re-opening the adc_ex1_soc_software.syscfg, controller gets automatically changed back to 100 PZ

over 1 year ago

0 Matt Kukucka over 1 year ago

TI__Mastermind 20380 points

Hello,

What version of CCS are you using and how are you switching the package type?

I was able to change the device to the 56 RSH package and confirm the settings stick in the adc_ex1_soc_software.syscfg after saving and rebuilding.

Best,

Matt

0 Vijayaraj Wali over 1 year ago in reply to Matt Kukucka

Prodigy 20 points

Hi Matt,

Code Composer Studio Version: 12.3.0.00005

is used

Best Regards,

Vijayaraj

0 Matt Kukucka over 1 year ago in reply to Vijayaraj Wali

TI__Mastermind 20380 points

Hi Vijayaraj,

Can you try updating CCS to the most recent version (12.8.1)?

Best,

Matt

0 Vijayaraj Wali over 1 year ago in reply to Matt Kukucka

Prodigy 20 points

Sure Matt,

I will update CCS to latest and re-check this.

Thanks,

Vijayaraj

0 Matt Kukucka over 1 year ago in reply to Vijayaraj Wali

TI__Mastermind 20380 points

Hi,

Please keep this thread updated if this resolves the issue.

Best,

Matt

0 Matt Kukucka 11 months ago in reply to Matt Kukucka

TI__Mastermind 20380 points

Hi,

As it's been a month without a reply, I will assume the issue is resolved and close this thread. Please open a new thread if you have further questions.

Best,

Matt

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280049C: Controller package automatically changes back to 100 PZ from 56 RSH