TMS320F280049C-Q1: DCSM configurations error

Jens G

Part Number: TMS320F280049C-Q1
Other Parts Discussed in Thread: SYSCONFIG, C2000WARE

Tool/software:

Hi team,

I tried again to enable the DCSM module on our project and I get the following error when trying to check the generated files and the sysconfig won’t generate because of the same error.

I tried to remove the old configuration and use an example but still get the same error.

Could you tell me where I could check the declared templates in order to remove the extra files?

Thanks

Jens

over 1 year ago

0 Luke Jones over 1 year ago

TI__Mastermind 28560 points

Hi Jens,

What version of C2000Ware are you using? I will test this on my side and determine the cause of the issue.

Thank you,

Luke

0 Teodor Manolache over 1 year ago in reply to Luke Jones

Prodigy 20 points

Hi! I am writing on behalf of Jens (actualy he wrote on behalf of me ), we are using C2000 version 5.02.00-00-4 and code composer version 12.7.0.00007 . I will try to delete the project and get it again as it seems that for a colleague that haven't done configurations in sysconfig doesn't have this error, mybe is something about past configurations i did.

0 Luke Jones over 1 year ago in reply to Teodor Manolache

TI__Mastermind 28560 points

Okay understood, let me know if you still encounter this issue after deleting the project.

Thank you,

Luke

0 Teodor Manolache 11 months ago in reply to Luke Jones

Prodigy 20 points

For some reasons my replys are not posting. After deleting everything multiple times the error is still there and i can't find where the templates are declared. So far i managed to do the configurations i needed on another colleague computer but i would still want to know if there is a fix for this.

0 Luke Jones 11 months ago in reply to Teodor Manolache

TI__Mastermind 28560 points

Hi Teodor,

Understood, I'll try to replicate this issue sometime tomorrow.

Thank you,

Luke

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280049C-Q1: DCSM configurations error