TMS320F28075: TMS320F28075:

JONGIN PARK

Prodigy 15 points

Part Number: TMS320F28075

Tool/software:

Hello,

I get the following error message while debugging. It doesn't get cleared even if I remove all breakpoints.

Let me know how to fix it.

CPU1_CLA1: Trouble Setting Breakpoint with the Action "Finish Auto Run" at 0x8c2aa: (Error -1209 @ 0x8C2AA) Device does not support software breakpoints. If available, use a hardware breakpoint. (Emulation package 12.7.0.00105)

Thank you.

James Park.

10 months ago

0 Ozino Odharo 10 months ago

TI__Mastermind 21335 points

Hi James,

It sounds like you are attempting to debug the CLA? If so, I would recommend checking out our debugging section in our CLA User's Guide.

https://software-dl.ti.com/C2000/docs/cla_software_dev_guide/debugging.html?highlight=debug

It has information on how you can go about debugging the code running on the CLA core.

Regards,

Ozino

0 JONGIN PARK 10 months ago in reply to Ozino Odharo

Prodigy 15 points

Thank you for your reply.

I solved my problem by building a new project. However, the original project that had the problem still has the problem.

I will check out T.I.'s debugging section in CLA User's Guide.

Thank you!

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28075: TMS320F28075: