• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 83 subscribers
  • Views 144 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SYSCONFIG: SYSCONFIG says its missing EMIF pin signals D16-D31 when I specified I use a 16-bit SDRAM

TMS320F28P650DK: Missing EMIF pin signals D16-D31 for SYSCONFIG when selected with a 16-bit SDRAM

Eric Chen
Intellectual 1910 points
Part Number: TMS320F28P650DK
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

Dear expert, 

Want to circle back to this thread.

SYSCONFIG: SYSCONFIG says its missing EMIF pin signals D16-D31 when I specified I use a 16-bit SDRAM - C2000 microcontrollers forum - C2000Tm︎ microcontrollers - TI E2E support forums

From the thread seems that the workaround should be using the "Custom" pinmux? 

Is this the sysconfig issue or we setup incorrectly?

Best Regards,

Eric Chen