TMS320F28035: How to load the program in Flash

Lawrence Wang

Part Number: TMS320F28035
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Hi experts,

I try to use CCS and C2000 Ware F2803X SDK, I found that it is different from other projects. It cannot be configured as active flash or active ram. It can only be configured as active debug. How can I configure it so that the program can be loaded into flash?

9 months ago

0 Charles Roberson 9 months ago

TI__Genius 15000 points

Hi Lawrence,

You need to add the Flash Linker cmd file for your project and to hide the RAM based one. You can do this in a FLASH generated configuration if you would like.

Thanks and regards,

Charles

0 Lawrence Wang 9 months ago in reply to Charles Roberson

TI__Intellectual 1200 points

Thank you for your reply, could you provide more detailed steps or any relevant manual?

+1 Alex Wasinger 9 months ago in reply to Lawrence Wang

TI__Expert 3140 points

Lawrence,

The Flash linker command file can be found at: "${C2000WARE_ROOT}\device_support\f2803x\common\cmd\F28035.cmd". Copy this file into the project, then right click on the RAM linker file (28035_RAM_lnk.cmd) and select "Exclude from Build". Then, rebuild the project and it will load to flash.

Best,

Alex

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28035: How to load the program in Flash