TMS320F28335 - ARINC 825 - Stack for CAN Protocol for Airborne use

Helmut Dunst

We are planning to use the arinc 825 CAN protocol with a TMS320F28335 in many new aircraft-related designs .

Is there a software related Arinc 825 protocol stack from TI or other vendors available to use the F28335 directly without any special devices from HOLT or....; to reduce the layout board space?

over 14 years ago

0 ChrisClearman over 14 years ago

TI__Guru** 119670 points

I'm not familiar with ARINC, but

http://www.simmasoftware.com/ti

is the stack provider I most recommend. Small and affordable. If you need something custom I know they can help.

0 mehul thummar over 12 years ago in reply to ChrisClearman

Prodigy 170 points

Hi..

we are trying to implement ARINC 825 protocol with TMS320F28335 for airborne use.

Can anyone tell me how can I configure baudrate, GPIOs, CAN-port, mailboxes with Message ID and length by using Function pointers in C programming.

any suggestion would be great help.

Regards

Mehul

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28335 - ARINC 825 - Stack for CAN Protocol for Airborne use