• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 82 subscribers
  • Views 215 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-F28P55X: TOOL/SOFTWARE

Li Weijun
Prodigy 10 points

Part Number: LAUNCHXL-F28P55X
Other Parts Discussed in Thread: C2000WARE

Tool/software:

My LAUNCHXL-F28P55X board cannot connect to Model Composer，but CCS and Putty work well.

Request for Assistance:
1. Is this tool supports the board?
2. If supported, how to connect ?

  • 0
    TI__Mastermind 20621 points

    Hi Li,

    What browser are you using? Have you downloaded TI Cloud Agent?

    Your hardware connection looks fine and LAUNCHXL-F28P55X is supported. Please double check that the S2 switch is in 00 position.

    Regards,

    Peter

  • 0 in reply to Peter Luong
    Prodigy 10 points

    Hi Peter，
    Thanks for your support！I rechecked things you mentioned：
    1. The browser is Microsoft Edge（Version 135.0.3179.85 ）；
    2. TI Cloud Agent has been installed；
    3. S2 is in 0：0 position.
    But the board still cannot connect to Model Composer.
    Do you have other solution？
    Regards，
    Li

  • 0 in reply to Li Weijun
    TI__Expert 5155 points

    Hello Li

    To connect with the model composer, you need the first run the target side code (T01955).

    Are you using the tida_01955 firmware from digital power SDK? If yes, this firmware uses F28P55x control by default. If you are using F28P55 launch pad, you should get an error connecting to target. To run this firmware with launch pad, you need to add  .ccxml file for launch pad. This available in DPSDK
    C:\ti\c2000\C2000Ware_5_04_00_00\device_support\f28p55x\common\targetConfigs.

    Thank you

    Amir Hussain