TMS320F280038C-Q1: TMS320F280038C-Q1

Prince thomas

Tool/software:

Hi team,

I'm working on C2000_38C here while debugging I'm facing an issue. firstly I can able to debug, but while pressing run the debugger keeps disconnecting.

I can't able to tune the motor in debugger mode in expression window, kindly help me to solve this issue ASAP.

over 1 year ago

0 Matt Kukucka over 1 year ago

TI__Mastermind 20380 points

Hi,

A couple of things I want to clarify:

Are you able to connect to the device when the application is not running?
Are any error messages given when the debugger disconnects?
Do any of the GPIOs used by the application conflict with the JTAG signals?

Best,

Matt

0 Prince thomas over 1 year ago in reply to Matt Kukucka

Intellectual 270 points

Hi Matt,

1.I could able to connect to the device when the application is not running.

2.I have attached the screenshot above.

3.I think it no!!

0 Matt Kukucka over 1 year ago in reply to Prince thomas

TI__Mastermind 20380 points

Hi Prince,

Prince thomas said:
1.I could able to connect to the device when the application is not running.

Something in your application must be causing the JTAG debugger to disconnect.

Prince thomas said:
2.I have attached the screenshot above.

In your screenshot, there is a message in the debug window. Can you expand that and let me know what it says?

Best,

Matt

0 Matt Kukucka over 1 year ago in reply to Prince thomas

TI__Mastermind 20380 points

Hello,

I'm happy to hear you got it working! What was the resolution?

Best,

Matt

0 Prince thomas over 1 year ago in reply to Matt Kukucka

Intellectual 270 points

Thanks for the reply, i got the problem solved!!!

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280038C-Q1: TMS320F280038C-Q1