TMS320F2800157: Out to Hex conversion

Shreeram Aithal

Tool/software:

Hello,
I need to convert the .out to. hex from the CCS IDE. Is there any way to change the setting to change the default file format for flashing?

+1 Ryan Ma 8 months ago

Hi Shreeram,

Based on the search results, here are the ways to handle file format conversion and default flash settings in CCS:

If you're using CCS12.8.1:

In CCS, when building your project, you can configure multiple output formats:
1. Go to Project Properties
2. Build -> C2000 Linker -> C2000 Hex Utility -> Enable Hex Utility
3. Select required .hex output

For CCS 20.x you can follow the same but the UI looks like the below:

For C29x devices:

Hex files can be created using the c29objcopy utility. This can be added as a post-build step in CCS project properties. Documentation is at software-dl.ti.com/.../util_objcopy.html

All compiler tools documentation is available at https://software-dl.ti.com/codegen/docs/c29clang/rel0_1_0_STS/indexC29.html

Best regards,

Ryan Ma

0 Shreeram Aithal 8 months ago in reply to Ryan Ma

Thank you, Ryan Ma, for the quick response. This was helpful.

C2000 microcontrollers forum