TMS320F2809:

Rob Hammerquist

Part Number: TMS320F2809
Other Parts Discussed in Thread: CONTROLSUITE, INSTASPIN-BLDC, MOTORWARE

Tool/software:

Can I use the InstaSPIN BLDC Solution to tune a sensor less motor using the C2000 chip family?; the exact variant we're using is the TMS320F2809

6 months ago

0 Yanming Luo 6 months ago

TI__Guru** 116350 points

If you are using InstaSPIN-BLDC trapezoidal control algorithm in controlSUITE, the answer is YES.

If you are using InstaSPIN-FOC for BLDC in motorWare, the answer is NO.

0 Rob Hammerquist 6 months ago in reply to Yanming Luo

Prodigy 10 points

Thank you Yanming!

0 Rob Hammerquist 6 months ago in reply to Yanming Luo

Prodigy 10 points

So as we understand it, we would run controlSUITE for the motor we wan't to use. The resultant tuned parameters get saved to flash, then all we have to do is issue a command for motor speed (for example), and monitor it?

0 Yanming Luo 6 months ago in reply to Rob Hammerquist

TI__Guru** 116350 points

Yes, but the motor or control parameters can't be saved to flash automatically, you need to update the parameters in the project and rebuild it.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2809: