TMS320F2800156-Q1: ADC

youjun zhang

Tool/software:

hi expert

Will there be an error if the adc result is not read after ADC conversion is completed? Is there any explanation in the data manual？

3 months ago

0 Joseph Casuga 3 months ago

TI__Mastermind 38140 points

Hi Youjun,

No, there will not be an error if ADC result is not read after conversion is completed. Upon trigger, start of conversion happens and at the end of conversion, the ADC result register is updated with the conversion result. User has to manage how to read the result or choose not to and this will not flag an error.

Regards,

Joseph

0 youjun zhang 3 months ago in reply to Joseph Casuga

Intellectual 600 points

Is there any explanation in the data manual？

0 Joseph Casuga 3 months ago in reply to youjun zhang

TI__Mastermind 38140 points

Hi Youjun,

This is a normal use case. It is not explained in the user manual.

Regards,

Joseph

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2800156-Q1: ADC